Operation Manual
FP+ Series Operation Manual 8
4.2.3 Input and Output connectors
All FP+ Series ampliers are equipped with balanced XLR-F input connectors. two-channel models also offer
parallel (“loop-thru”) XLR-M output connectors for daisy-chaining multiple ampliers from the same signal
source.
All FP+ Series ampliers except the FP 9000, FP 13000 and FP 14000 offer a choice of either binding post
(BP) or Neutrik© NL4FC Speakon output connectors (SP). The FP 9000, FP 13000 and FP 14000 are offered
with BP connectors only as the potential maximum output current exceeds the recommended limits for the
Speakon connectors.
For specic conguration and wiring information, see section 7.4.
QUICK GUIDE OVERVIEW 4
Audio inputs - four-channel models Audio inputs and loop-thru connectors -
two-channel models
Speakon outputs - four-channel models
Speakon outputs - two-channel models Binding Posts - two-channel models
Binding Post outputs - four-channel model
Figure 4.2.3a: Two- and four-channel input connector congurations