Lake Controller Operation Manual Version 1.7.0

Lake Controller Operation Manual Rev 1.7.0
Lake Controller Tutorial
59
4.7 Lake Controller File Types
Before saving the simple conguration just created, it is useful to learn about the le types used to store and
recall settings within the Lake Controller software. The following sections describe the various le types.
4.7.1 Base Conguration Files
A base conguration le denes a starting point for the Module setup. It can contain EQ, crossover, and
level settings that can be hidden or protected from end-user adjustment. The result of all EQ, levels, and
crossover settings for the Module, and any Group that it belongs to, can be combined and stored in the base
conguration le.
Figure 4-54: Contour [.cbm] & Mesa [.mbm] Base Conguration Files
4.7. 2 Single Module File
These les store all information contained in the base conguration le plus user settings for each Module
including the mute states, levels (gain, delay, and limiters), and equalization (lters and EQ overlays).
Figure 4-55: Contour [.csm] and Mesa [.msm] Single Module Files
4.7.3 System Conguration File
This le stores/recalls all information contained within all Contour or Mesa single-Module les on a given
network, and additionally includes generic Frame data and all Group assignments and settings.