Lake Controller Operation Manual Version 1.7.0
140
Lake Controller Operation Manual Rev 1.7.0
Modules Menu Reference
PRODUCT DANTE IN DANTE OUT DUAL REDUNDANCY AES67 SUPPORT
Lake LM Series 4 channels 8 channels YES NO
PLM Series 2 channels
2 channels
(unprocessed audio only)
YES NO
PLM+ Series 8 channels
8 channels
(unprocessed audio only)
YES YES
D Series 8 channels
8 channels
(unprocessed audio only)
YES YES
MY8-LAKE N/A N/A N/A N/A
Table 8-3: Dante Input / Output Channels and AES67 support by Product
8.2.5.3 Transmit Tab
When Dante is enabled, by default the device will receive networked audio but will not transmit audio.
Transmission is disabled in order to prevent unnecessary network trafc and unused channels on
the INPUT CONFIGURATION screen of all other devices on the network.
To transmit Dante channels from a device:
1. Tap the DANTE DISABLED button on the DEVICE tab
2. Tap the TRANSMIT tab
3. Tap the TRANSMIT OUTPUTS button
Transmit channels from this device will now appear on the list of all available Dante channels on the
network.
Dante Transmit can be enabled globally for all Dante-enabled
devices in the current system conguration via Home > All >
Global Info > Events & Control > Control > Global Dante Transmit
Enabled control.