Lake Controller Operation Manual Version 1.7.0

100
Lake Controller Operation Manual Rev 1.7.0
EQ/Levels Menu Reference
6.4.6 Crossover Functions
CROSSOVER FUNCTIONS provides a submenu containing the following functions:
6.4.6.1 HPF/LPF Functions
▸ HPF/LPF FUNC EXIT exits this menu and returns to the CROSSOVER FUNCTIONS menu.
▸ INPUT HPF SETs the HPF to affect all output channels for the Module (depending on the frequency of
the HPF and outputs). Applicable to Contour Modules only.
▸ LOW OUTPUT HPF SETs the HPF to affect only the lowest output channel of the selected Module.
Applicable to Contour Modules only.
▸ HPF ENABLE enables/disables the HPF for the selected Module.
▸ LPF ENABLE enables/disables the LPF on the highest output channel for the selected Module.
INPUT HPF and LOW OUTPUT HPF are disabled for
the Linear Phase Brick Wall 4-Way Module. The
LP4way HPF is xed to INPUT HPF. Other Module
types, incl. LP2/LP3way provide the HPF option.
6.4.6.2 Crossover Hide
Available only in Designer Mode. When enabled (orange), the crossover page will be hidden when the
Module is locked, or after exiting from Designer Mode.
6.4.6.3 Crossover View Only
Available only in Designer Mode. When enabled (orange), the crossover page will be set as view only when
the Module is locked, or after exiting from Designer Mode.
6.4.6.4 EQ Preferences
This provides a submenu containing options regarding the view of the EQ scale.
6.4.6.5 Crossover Copy
Copies all crossover and EQ settings from the selected XOVER or HPF/LPF page.