Lake Controller Operation Manual
Table Of Contents
- 1. Welcome
 - 2. Software Installation
 - 3. Network & Firewall Overview
 - 4. Lake Controller Tutorial
 - 5. Home Menu Reference
 - 6. EQ/Levels Menu Reference
 - 7. System Store Recall Menu Reference
 - 8. Modules Menu Reference
 - 10. Groups Menu Reference
 - 11. Solo/Mute Menu Reference
 - 12. Icon Control Menu Reference
 - 13. User Preferences Menu Reference
 - 14. Pages Menu Reference
 - 15. Network Menu Reference
 - 16. Communication and Synchronization
 - 17. Faults and Warnings
 - 18. Analyzer Plug-in
 - 19. Designer Mode Menu Reference
 - 20. Lake-enabled Amplifier Reference
 - 21. LM Series Reference and Operation
 - 22. MY8-LAKE Reference and Operation
 - 23. Keyboard Shortcuts
 - 24. External Control Interfaces
 - 25. Command Line Options
 - 26. Firmware Update
 - 27. Preset Manager
 - 28. IP Address Reference
 - 29. Corporate Information
 
Lake Controller Operation Manual Rev 1.5.9
Lake Controller Tutorial
45 
Figure 4-29: Clipping and -2 dB warning indicators
As limiters are engaged, the amount of gain reduction is shown with a meter operating in the downward 
direction.
Figure 4-30: Orange downward meters indicate channel limiting
The limiter meter displays the total amount of limiting resulting from both peak and RMS limiter functions of 
the LimiterMax
™
 loudspeaker protection system.










