Lake Controller Operation Manual

Lake Controller Operation Manual Rev 1.5.9
Network & Firewall Overview
21
Figure 3-11: Connecting to a wireless access point
3. Enter the network security key, or press the button on the wireless access point if requested.
4. If you encounter network problems when using the default automatic IP address allocation (more likely
with Windows XP), please setup a xed IP address as described in section 3.3.
Please refer to chapter 28 for more information on
the selection of an appropriate IP address.
3.5.3 Conrming Wireless Operation of the Lake Controller
To conrm wireless operation:
1. Double-tap the LAKE CONTROLLER icon to start the software. If you have more than one network
adapter enabled, the SELECT NETWORK ADAPTER dialog box will be displayed; select the
WIRELESS NETWORK ADAPTER.
2. Tap NO when asked whether to recall the last conguration. A brief resync message will appear for
each Lake device on your network, conrming that your network connection is operating properly.
3. Tap MODULES. Each online device is represented on the Module scroll bar by a number of Module
icons surrounded by a border.
4. Tap QUIT CONTROLLER to exit.