Lake Controller Operation Manual Version 1.7.0

Lake Controller Operation Manual Rev 1.7.0
Modules Menu Reference
161
Figure 8-30: Batch Replace Screen
8.4.5.1 Assigning the Virtual Frames to the Destination Frames
With the exception of very small systems, the virtual/ofine Frame must be labeled to enable Frame identi-
cation. If the destination Frame of the same product type and conguration is also labeled with a matching
name, the assignment will be automatic. Tapping START REPLACE will transfer data to the associated
online Frames.
If the destination Frames are not labeled:
1. Type the corresponding ofine/Virtual Frame number into the # eld, either via the on-screen or a
manual keyboard.
2. The destination Frame will move up or down the list so that it is on the same row as its corresponding
ofine/Virtual Frame.
3. Tap START REPLACE, then tap YES to the conrmation message.
All ofine/Virtual Frame data will be transferred to the online Frames.