Lake Controller Operation Manual
Table Of Contents
- 1. Welcome
 - 2. Software Installation
 - 3. Network & Firewall Overview
 - 4. Lake Controller Tutorial
 - 5. Home Menu Reference
 - 6. EQ/Levels Menu Reference
 - 7. System Store Recall Menu Reference
 - 8. Modules Menu Reference
 - 10. Groups Menu Reference
 - 11. Solo/Mute Menu Reference
 - 12. Icon Control Menu Reference
 - 13. User Preferences Menu Reference
 - 14. Pages Menu Reference
 - 15. Network Menu Reference
 - 16. Communication and Synchronization
 - 17. Faults and Warnings
 - 18. Analyzer Plug-in
 - 19. Designer Mode Menu Reference
 - 20. Lake-enabled Amplifier Reference
 - 21. LM Series Reference and Operation
 - 22. MY8-LAKE Reference and Operation
 - 23. Keyboard Shortcuts
 - 24. External Control Interfaces
 - 25. Command Line Options
 - 26. Firmware Update
 - 27. Preset Manager
 - 28. IP Address Reference
 - 29. Corporate Information
 
16  
Lake Controller Operation Manual Rev 1.5.9
Network & Firewall Overview
2.  Select the appropriate network connection (Local Area Connection or Wireless Network Connection) to 
congure, then select “Change settings of this connection” as shown in Figure 3-5.
Figure 3-5: Selecting Wired Network Connection
Although this tutorial uses Local Area Connection as 
an example, the principles also apply to Wireless 
Network Connection.
3.  Select INTERNET PROTOCOL VERSION 4 (TCP/IPV4), and tap the PROPERTIES button.
Figure 3-6: Local Area Connection Properties










