Lake Controller Operation Manual Version 1.7.0
190
Lake Controller Operation Manual Rev 1.7.0
Groups Menu Reference
10.6 Remove
This function removes the selected Group from the current system conguration. To remove a Group, select
the Group icon, tap REMOVE, then tap YES to the warning message.
The warning message is displayed only if the Group has Modules assigned to it. The Group icon reappears
in the scroll bar indicating it is not currently in use.
A Group can also be removed by dragging the icon
back to the GROUPS scroll bar.
10.7 Gang
Tapping this button activates a scroll bar containing all Modules currently assigned to the selected Group,
along with a submenu.
Figure 10-3: Group Gang Menu
10.7.1 Gang Xover/Aux or Gang HPF/LPF
This button read GANG XOVER/AUX when a Group containing Contour Modules is selected, and GANG
HPF/LPF when a Group containing Mesa EQ Modules is selected. These functions allow the crossovers,
auxiliary output channels, and HPF/LPF settings of Modules on different Frames to be linked together.
▸ When GANG XOVER/AUX is active on a Group containing crossover Modules, the crossovers, HPF/LPF,
and auxiliary channels of all Modules in the Group are synchronized. A change made in one Module will
be reected in all Modules of that Group.
▸ When Gang HPF/LPF is active on a Group containing Mesa EQ Modules, the HPF/LPF will be linked on
all Modules in the Group.