Quick Start Guide

13. System confi gration tutorial
13. System confi gration tutorial
30
D SERIES Lake Quick Start Guide rev 3.0.3
D SERIES Lake Quick Start Guide rev 3.0.3
31
14. The B module is already a CL1way as default and can be used to drive the sub.
15. Tap Store/Recall EXIT to return to the Modules Menu.
16. Ensuring Module A (or any other module that you want to control) is selected (yellow border), tap I/O Confi g.
17. The right side of the I/O CONFIG screen displays a block diagram for the Modules. Tapping the different blue
blocks will access the confi guration screens for Input mixer, Levels, Input EQ, Delay and Output EQ/Crossover
respectively. The magnifying glass at the far right end accesses the output confi guration. (NOTE: Tapping the
blue return button (left arrow), or the EQ/Levels EXIT button in the menu bar returns to the I/O Confi g screen
from the various confi guration screens.)
Input Mixer Confi guration – Drag sliders and tap ON/OFF buttons to control input mixer settings.
Levels Control - Drag sliders and tap mute buttons for module
input and output channels.
Delay Control - Drag sliders to control input and output delay Crossover control – Select fi lters and drag on the bottom
frequency bar to adjust crossover frequency. Crossover
types may be changed by selecting the Crossover
Functions button.
Parametric EQ control – Select fi lter on the top squares
and adjust fi lter properties by dragging the controls. Sliders
at the bottom control center frequency and Q (bandwidth).
Gain is controlled in the main window area. Additional fi lters
can be added by tapping the top fi lter objects and placing
new fi lters on the main area.
18. Tap the Input Gain button in the block diagram and unmute the Module Input Mute. Tap EQ/Levels Exit to return to
IO Confi g.
19. The left side of the IO confi g screen holds frame confi guration and summary for Clock confi guration, Input
confi guration, Dante confi guration, Breaker Emulation Limiter confi guration and Analog Iso–Float & AES Termination
confi guration. All these confi gurations should be correct by default for this example.
20. From I/O confi g, tap Amplifi er Events & Control and navigate to the Status tab. Unmute the power channels and
slowly increase the volume on the appropriate feed from the mixing console. Audio should now be active at the
outputs and heard through the loudspeakers. Close the Amplifi er Events & Control dialog with the return button and
return to the main area by tapping the I/O Confi g EXIT button.
Amplifi er Events & Control, Status tab – Drag sliders to adjust power channel attenuation and tap mute
buttons to control power channel mute. Metering and Status monitoring is available for each power channel.