Lake Controller Operation Manual Version 1.7.0
78
Lake Controller Operation Manual Rev 1.7.0
EQ/Levels Menu Reference
6. 2.7.5 AmpClip
AmpClip provides a parameter for scaling the output metering of the Lake device to calibrate the clipping
point to a given amplier’s sensitivity. This value (the AmpClip reference level) is set in dBu and is a sum of
the factory AmpClip value (dBu) and the user AmpClip value (dB).
In both AmpClip Reference and MaxRMS Reference metering modes, the output peak meters will turn red
at the AmpClip reference level to indicate possible output clipping as shown in Figure 6-7.
Figure 6-7: AmpClip Level Indicators
6. 2.7.6 Level Limits
This function button is visible only in Designer Mode, and is used for setting minimum and maximum values
for all Levels attributes described in this chapter.
6.2.7.7 Adjust Factory
This function button is visible only in Designer Mode and is used for dening default level settings and level
limits for all attributes described in this chapter.