Lake Controller Operation Manual Version 1.7.0

Lake Controller Operation Manual Rev 1.7.0

Lake Controller Tutorial

4.3.5 I/O Cong

This section assumes the use of classic routing

mode; all providing extensive I/O routing options.

The MY8-LAKE in simplied view provides a xed

output cong.

1. Tap the I/O CONFIG button to display the block diagrams of each Module in the Frame.

Figure 4-21: LM 44 I/O Conguration Screen with Input Conguration Summary enabled

The right side of the I/O CONFIG page can be dragged to scroll up and down for viewing of all Module block

diagrams where all diagrams cannot t on the screen.

2. Tap any black space within the block diagram area and drag up or down to scroll. The I/O CONFIG page

is interactive; each blue processing block can be selected to directly access the relevant screen in the

software. Each block diagram has a front-end input mixer.

3. Tap any one of the four inputs of the ‘My 3-Way’ Module to access the input mixer.