Lake Controller Operation Manual Version 1.7.0

Lake Controller Operation Manual Rev 1.7.0
Firmware Update
309
If more than one network adapter is enabled, a screen similar to that shown in Figure 27-2 will be displayed.
Always ensure you select a wired network for updating rmware as a loss in connectivity could corrupt the
rmware.
Figure 27-2: Network Adapter Selection
5. Select the wired adapter to which the Lake devices are connected.
The Lake devices will appear in a list with their current rmware versions displayed, similar to that shown in
Figure 27-3. The rmware version to be loaded is shown at the top of the screen (target rmware); this will
default to the latest version available.
Figure 27-3: Lake Update Utility Main Screen