Lake Controller Operation Manual Version 1.7.0

Lake Controller Operation Manual Rev 1.7.0
Command Line Options
307
Command Description
forcenetwork
Forces Lake Controller to use a specic NIC (Network Interface Card), and
hence doesn’t show the NIC selection menu normally displayed when multiple
NICs are available on the computer. For an NIC with IP address 169.254.10.10,
the complete string should be forcenetwork=169.254.10.10
forcesystemle
Will do a RECALL AS NEW SYSTEM directly on Lake Controller startup to
the specied system le in the System les folder. No “Load Last” dialog is
displayed. The complete string should be forcesystemle=XYZ.csc
comparesystemle
Will do a RECALL COMPARE directly on Lake Controller startup to the specied
system le in the System les folder. No “Load Last” dialog is displayed.
The complete string should be comparesystemle=XYZ.csc
Table 26-1: Command Line Options