Manualshelf

Lake Controller Operation Manual Version 1.7.0

ManualsBrandsLab Gruppen ManualsPower Amplifiers1000W Amplifier with 4 Flexible Output-Channels, Lake Digital Signal Processing and Digital Audio Networking for Installation Applications
301302303304305306307308309310
Lake Controller Operation Manual Rev 1.7.0
Keyboard Shortcuts
299
24.4.1 GEQ Overlay Shortcuts
▸ LEFT ARROW: Moves the GEQ selector one lter to the left
▸ RIGHT ARROW: Moves the GEQ selector one lter to the right
▸ UP ARROW: Increases the gain of the selected GEQ lter (Fine).
▸ UP ARROW + SHIFT/CAPS LOCK: Increases the gain of the selected GEQ lter (Coarse).
▸ DOWN ARROW: Decreases the gain of the selected GEQ lter (Fine).
▸ DOWN ARROW + SHIFT/CAPS LOCK: Decreases the gain of the selected GEQ lter (Coarse).
24.4.2 PEQ Overlay Shortcuts
▸ [1]: Adds a low-shelf lter at 125 Hz.
▸ [2]: Adds a Parametric lter at 500 Hz.
▸ [3]: Adds a Mesa lter with low frequency at 830 Hz and high frequency at 1.2 kHz.
▸ [4]: Adds a high-shelf lter at 8 kHz.
▸ [E]: Enables FILTER EDIT mode for the manual entry of gain/freq/bandwidth via a keyboard
▸ [G]: The gain value for the selected lter is displayed in the on-screen keyboard.
▸ [F]: The frequency value of the selected lter is displayed in the on-screen keyboard.
▸ [CTRL] + [F]: The high-frequency value of a selected Mesa lter is displayed in the on-screen keyboard.
▸ [B]: The bandwidth value of the selected lter is displayed in the on-screen keyboard.
▸ [[CTRL] + [B}: The high-bandwidth of the selected Mesa lter is displayed in the on-screen keyboard.
▸ [<]: Moves the center frequency of the selected lter to the left (Fine).
▸ [SHIFT] or [CAPS LOCK] + [<] : Moves the center frequency of the selected lter to the left (Coarse).
▸ [>]: Moves the center frequency of the selected lter to the right (Fine).
▸ [SHIFT] or [CAPS LOCK] + [>]: Moves the center frequency of the selected lter to the right (Coarse).
▸ LEFT ARROW: Selects the lter to the left of the currently selected lter.
▸ RIGHT ARROW: Selects the lter to the right of the currently selected lter.
▸ UP ARROW: Increases the gain of the selected PEQ lter (Fine).
▸ [SHIFT] or [CAPS LOCK] + UP ARROW: Decreases the gain of the selected PEQ lter (Coarse).
▸ DOWN ARROW: Decreases the gain of the selected PEQ lter (Fine Adjustment).