Lake Controller Operation Manual Version 1.7.0
Lake Controller Operation Manual Rev 1.7.0
Lake-enabled Amplifier Reference
259
20.5 Navigation
The AMPLIFIER EVENTS & CONTROL functionality, when used with Lake-enabled ampliers, provides
additional module-level information including STATUS, HISTORY and LOADSMART information.
MODULE VIEW and GLOBAL VIEW. Each has further tabbed views.
Figure 20-3: Events & Control Module View Tabs
20.5.1 Accessing Module View
Module View can be accessed by three different methods.
1. Tap HOME [F1] then tap a Module icon. Ensure LEVELS is selected, then tap AMPLIFIER
EVENTS & CTRL (located below the rst output fader).
2. Tap HOME [F1] then tap MODULES [F3]. Select a Module, tap I/O CONFIG [F4] then tap
EVENTS & CTRL [F7].
3. Tap HOME [F1] then tap the ALL page tab. Tap a Module icon to access AMPLIFIER EVENTS & CTRL.
20.5.2 Accessing Global View
To access Global View:
1. Navigate to the ALL page then tap GLOBAL EVENTS & CTRL [F9]
Figure 20-4: Events & Control Global View Tabs
20.6 Status Tab
The STATUS display is selected by tapping the STATUS tab in MODULE VIEW.
Channel strips display data relating to each power output section assigned to the selected Module.
The channels are presented in Module output order (e.g. low, mid, high). If a Module output is assigned to
more that one power output channel then this is displayed accordingly (e.g. low, low, mid, high).