Lake Controller Operation Manual Version 1.7.0
Lake Controller Operation Manual Rev 1.7.0
User Preferences Menu Reference
197
13.3.4 Module Output Mixing (PLM+ and D Series ampliers only)
If Module Output Mixing is enabled, it is possible to create a Secondary output routing scheme that enables
the combining of outputs for a Module. Applications of this feature include mixing multiple module channel
outputs and sending to the same speaker output, in addition to creating frequency-dependant limiters.
The Primary channel sets the ISVPL limiter and Amp Gain settings, so this limiter is after the summation of
Primary and Secondary routes.
Ensure LevelLimits limiter values are correct, as when two or more channels
are combined, the total level of the combined signal cannot be above 21 dBu. A
value over this amount will result in a hard clip, indicated with a module clip on
the DSP channel that has the Primary route to the Power channel.
13.4 Keyboard Shortcuts
The KEYBOARD SHORTCUTS button enables (orange) or disables (blue) keyboard shortcut functionality. For
details on all available keyboard shortcuts, please refer to chapter 19.
13.5 About
Tap the ABOUT button to view the current Lake Controller software version. Tap anywhere on the display to
return to the previous view.
13.6 Graphics
13.6.1 Display Mode
Display Mode provides options to run the Lake Controller in fullscreen mode (default) or various xed-
resolution Window modes to allow for easier parallel use with other Windows applications.
Display Mode is persistent after restarting the
Lake Controller. If the Display Mode is changed to
an unsupported resolution, this can be corrected
manually via the IC.ini le.
13.6.2 Auto Icon Arrange
This button is on by default, automatically placing icons so they do not overlap each other.