Lake Controller Operation Manual Version 1.7.0

172
Lake Controller Operation Manual Rev 1.7.0
Module File Types & Lake LoadLibrary™
Additionally, loudspeaker electrical characteristic parameters (termed Fingerprint and used for LoadSmart™
verication) are stored and recalled via a supplementary “.mdl” le with the same lename. This Fingerprint
le must be present in the same directory as the Module le; it is stored and recalled for Lake-enabled
ampliers, and ignored for other Lake devices. Fingerprint data may be reconnected with a Module le
simply by renaming or moving the mdl le to ensure it has the same lename and directory location as its
associated Module le. When a Fingerprint is loaded, this can be seen in the LoadSmart tab of the Amplier
Events & Control view.
9.3 Module Type Abbreviations
Figure 9-1 identies the Module type abbreviation code.
Figure 9-1: Module Icon indicating Module Type Code
Table 9-1 describes the various abbreviation codes along with the associated Module description.
Abbr. Description # Modules used
1 Classic 1-Way or 1-Auxiliary Outputs 1
2 Classic 2-Way or 2-Auxiliary Outputs 1
2+1 Classic 2-Way + 1-Auxiliary Outputs 1
3 Classic 3-Way or 3-Auxiliary Outputs 1
3+1 Classic 3-Way + 1-Auxiliary Outputs 1+1 borrowed channel
4 Classic 4-Way or 4-Auxiliary Outputs 1+1 borrowed channel
5 Classic 5-Way or 5-Auxiliary Outputs 1+2 borrowed channel
6 Classic 6-Way or 6-Auxiliary Outputs 2
LP2 Linear Phase 2-Way + 1-Auxiliary Outputs 1
LP3 Linear Phase 3-Way 1
LP4 Linear Phase Brick Wall 4-Way 2
FIR1 FIR 1-Way 2
FIR2 FIR 2-Way 2
FIR3 FIR 3-Way 2
XP1 XP1-Way 1
XP2 XP2-Way 2
XP3 XP3-Way 3
XP4 XP4-Way 4
MEq Mesa EQ 1
Table 9-1: Module Type Abbreviations