Lake Controller Operation Manual Version 1.7.0

Lake Controller Operation Manual Rev 1.7.0
Modules Menu Reference
165
8.6.5.2 Read Only
This function protects important les from being accidentally overwritten or deleted and is active only when
a le is selected. The currently selected le’s status is identied by the color of the READ ONLY button:
▸ ORANGE - indicates the selected le is set to READ ONLY.
▸ BLUE - indicates the selected le is not protected.
To change the Read Only status of a le:
1. Tap a le from the scroll bar to select it.
2. Tap READ ONLY to toggle function ON (orange) and OFF (blue).
8.6.5.3 Rename
This button allows the name of a le/folder to be changed.
1. Tap the required le/folder from the scroll bar, then tap RENAME.
2. Enter the new name, and tap OK.
8.6.5.4 Delete
This button is active only when a le or folder is selected. When a le is selected, this function will only be
available if the le is not set to READ ONLY. To delete a le or folder:
1. Tap a le or folder to select it, then tap DELETE.
2. Conrm action by tapping YES in the warning message.
Deletion of a le is permanent and cannot be
restored using the UNDO function.
8.6.5.5 New Folder
This button creates a new folder in the current directory.
1. Navigate to the desired directory location and tap NEW FOLDER.
2. Enter the folder name, and tap OK.