Lake Controller Operation Manual Version 1.7.0

Lake Controller Operation Manual Rev 1.7.0
Modules Menu Reference
151
For any other scenarios, the appropriate delay adjustments must be made manually.
8. 2 .10 Technical Data
The technical data screen is displayed by tapping TECHNICAL DATA (F5) on the I/O CONFIG button bar.
Technical Data includes hardware-based Frame data including IP Address, Dual Redundancy, Front Panel
Conguration (D Series only) and Dante Slave Only settings that are unaffected by SYSTEM RECALL,
FRAME REPLACE, FRAME PRESET RECALL or FRAME CONFIGURATION and SOFT RESET options.
When any of these hardware-based parameters are changed, a power cycle is required to apply the changes.
Figure 8-27 shows the technical data screen for an LM 44 and a PLM 20K44. Most information is similar for
all products, any product differences are detailed in the following sections. The LM Series and PLM Series
have the same feature set available, and the D Series and PLM+ have a more advanced feature set available.
All features are described in detail in the following sections:
Figure 8-27: LM 44 and PLM+ 20K44 Technical Data Screens
8.2.10.1 Product/Model
The description and model number for the selected device.