Lake Controller Operation Manual Version 1.7.0

Lake Controller Operation Manual Rev 1.7.0
Modules Menu Reference
129
Figure 8-7: Input Conguration Active Input and Summary view on I/O Cong screen
After tapping the zoom button or anywhere on the text, an INPUT CONFIGURATION screen similar to
that shown in Figure 8-8 will be displayed. The number of available input routers varies depending on the
product type
Figure 8-8: LM 44 Input Conguration Screen
8.2.2.1 Autoselect
The input auto-selection feature enables the set up of a redundant system. The device will attempt to use
the rst signal; if the rst signal is unavailable it will try the second, third, or fourth signal.
By default Priority 1 is set to Dante Receivers, Priority 2 is empty, Priority 3 is AES and Priority 4 is Analog.