Lake Controller Operation Manual Version 1.7.0

Lake Controller Operation Manual Rev 1.7.0
EQ/Levels Menu Reference
109
1. Tap AUX -1 to select the Auxiliary Output tab for output 1.
2. Add a low and a high-shelf lter.
The screen should look similar to Figure 6-24.
:
Figure 6-24: Adding a High Shelf and Low Shelf Filter to Aux-1
EQ added to an Aux tab affects only the associated output. Module and Group input EQ (PEQ/BLEQ/GEQ)
still affects all outputs of the Module.
6.5.4 High-pass and Low-pass Filters
The high-pass and low-pass lter controls are located under the AUX OUTPUT FUNCTIONS submenu.
1. With the AUX-1 tab selected, tap AUX OUTPUT FUNCTIONS
2. Tap HPF ENABLE then tap LPF ENABLE