Lake Controller Operation Manual Version 1.7.0
4
Lake Controller Operation Manual Rev 1.7.0
Welcome
▸ Chapter 26, Command Line Options, provides the list of available switches that can be used when
starting the Lake Controller to provide alternate functionality.
▸ Chapter 27, Firmware Update, presents the methods in which you can update the rmware of your Lake
device using the associated Firmware Update Utilities.
▸ Chapter 28, Preset Manager, provides information on using the separate Preset Manager utilities that
are provided in the Lake Controller software suite.
▸ Chapter 29, IP Address Reference, provides reference information for conguring IP addresses for the
Lake Controller and Lake device network.
If you are using the Controller for the rst time, please read the tutorial in chapter 4 to become familiar with
the features and terminology. For information on Lake device hardware and front panel functionality, please
refer to the associated operation manuals.
The information in this manual is based on the use of a touchscreen Tablet PC, which utilizes a pen interface
instead of a mouse. Therefore the word TAP is used instead of CLICK when referring to tapping the pen on
the screen, which is equivalent to clicking the left mouse button. If you are using a mouse instead of a pen,
substitute a click of your left mouse button when instructed to tap.