Lake Controller Operation Manual

182
Lake Controller Operation Manual Rev 1.5.9
Groups Menu Reference
4. Tap ASSIGN to deactivate the function.
Module Group assignments can be veried by selecting a Group icon in the work area. The selected Group
and associated Module icons will display yellow borders as shown in Figure 10-2.
Figure 10-2: Group Assignment Indication
If the Keep Group Assignment function is disabled (default) on the Modules Store/Recall menu, Group
assignments will be lost when a Module is recalled. A warning message will be displayed to conrm this
action.
If the Keep Group Assignment function is enabled on the Modules Store/Recall menu, Group assignments
will be maintained when a Module is recalled.
Modules will not allow assignment of Group/s if it
will result in level limits being exceeded. Warning
messages will be displayed if a Group assignment
would cause the Module to exceed its level limits.
The rst Module assigned to the Group will be
used for Group level metering purposes. This
metering assignment can be changed later if
required; please refer to section 6.2.7.
10.4 Label
The Group label is a user-dened value at the bottom of the Group icon that is useful for identifying the part
of the sound system to which the Group communicates (front of house, monitors, down-ll, and so on).
To label a Group, perform the following steps:
1. Tap the desired Group icon.
2. Tap LABEL and enter a Group label.
3. Tap OK.
10.5 Copy/Paste
Select a Group in the work area, and tap COPY/PASTE to view a submenu that transfers attributes between
Groups.