Lake Controller Operation Manual

Lake Controller Operation Manual Rev 1.5.9
Modules Menu Reference
159
screen is displayed to enable conrmation of output routing - this setting can be changed by toggling the
option on the Output Conguration screen.
By default, a Module recall will remove the Module from any assigned Groups and a warning will be
displayed to conrm this action. If the Keep Group Assignment option is enabled, the assignment of the
Module to the Group will be maintained during the Module recall.
Figure 8-31: Recalling a Module File
Recalling a Module le overwrites all data currently
stored in the selected Module and if “Keep Group
Assignment” is not enabled it will also remove the
Module from any Groups.
EAW
®
Greybox
TM
le (.gyx) may also be recalled
directly into the Modules of Lake-enabled
ampliers. Please refer to chapter 9 for further
details.
8.6.2 Store
The STORE button stores over an existing le. This button is active only when a le is selected.
1. Tap an existing le to store over (overwrite).
2. Tap STORE.
3. Conrm the action by tapping the YES button in the warning message.
If the selected le is set to READ ONLY, the STORE
function is gray (inactive).
8.6.3 New Store
The NEW STORE button stores the current Module conguration under a new le name.
1. Navigate the le system, and tap the desired destination folder to select it.
2. Tap NEW STORE.