Data Sheet
Speaker outputs
Detachable terminal block connectors for easy
install (up to 8 mm
2
or 8.2 AWG cables)
Two AES3 digital inputs (4 audio channels) 16 amp locking IEC for mains supply
Analog inputs with Iso-Float
Four “Lake class” analog inputs with Iso-Float
ground isolation
EtherCON inputs
Two etherCON jacks are provided for the dual
redundant control and Dante connections
CAFÉ and RPM for Green Credentials
D Series is confi gured and monitored using Lab.gruppen’s CAFÉ
(Confi guring Amplifi ers For the Environment) software suite. In
addition to providing comprehensive system surveillance and
confi guration of RPM and other amplifi er features such as ISVPL and
Breaker Emulation Limiter (BEL), CAFÉ also includes valuable help
to save the environment. In combination with the RPM confi guration
CAFÉ can accurately predict, based on the true SPL and speaker
requirements of the individual loads for the given project, estimations
of average mains current draw and generated heat in BTU. With
D Series’ innovative power supply technologies (true Power Factor
Correction and internal energy storage) the required mains draw
is already best in class in relation to burst power output, but in
combination with the BEL the mains draw can also be safeguarded
to the predicted level. The end result is precise mains management
and thermal control, which allows more accurate (rather than over-
specifi ed) provision of mains distribution, cabling and cooling.
This technology suite not only saves on installation costs, it also
reduces lifetime running costs and minimizes environmental impact.
It also reduces demands on UPS systems in “mission critical” voice
evacuation systems in arenas and stadia.
CAFÉ and Equipment Specifi cation Predictor (ESP)
CAFÉ also features an innovative design aid – the Equipment
Specifi cation Predictor (ESP). ESP examines the system SPL and
speaker requirements for a given project and aids in transforming
that data into circuit and amplifi er channel requirements. On a system
level, ESP supplies a recommendation for optimized placement of
channels into amplifi ers for the most cost eff ective solution. The
recommendation includes model and quantities of D Series required
with most rational use of amplifi ers, minimizing wasted headroom.
Windows 10
WWW.LABGRUPPEN.COM