User guide

5. Operation and Performance

C Series C 88:4, C 68:4, C 48:4, C 28:4 and C 16:4 Operation Manual rev 2.2.3

5.4.7 Output Current Peak Limiter (CPL)









▸ 

▸ 

▸ 

▸ 

▸ 













If the CPL LED is steadily illuminated orange while the output

is muted and the -4 dB signal LED is NOT on, then the

amplier output is detecting a short circuit or low impedance

condition. The problem can be solved by checking input and

output cables and examining the state of the loudspeaker

load. If there is no short circuit present, then the condition may be rectied

by lowering the VPL or input levels.



