User guide

5. Operation and Performance

C Series C 88:4, C 68:4, C 48:4, C 28:4 and C 16:4 Operation Manual rev 2.2.3

5.4 Audio Input and Output connections, setup and features

5.4.1 Balanced / Unbalanced Input connection















When linking the same source signal to several input channels,

be aware that there is a limit to the number of channels an

output source can “drive”. A typical output source (e.g. a DSP

crossover unit) can drive up to 4 amplier channels before

line-drivers would be required to buffer the signal.

5.4.2 Output operation and connection















5.4.3 Output bridge mode





