User guide

5. Operation and Performance

C Series C 88:4, C 68:4, C 48:4, C 28:4 and C 16:4 Operation Manual rev 2.2.3

5.3.2 Headroom, sensitivity and VPL / Gain settings























If you use the level potentiometer in the signal chain to

reduce the level by an amount greater than the headroom

relative to input sensitivity, AND you drive the amplier to clip

level, you are in danger of clipping the input stage before the

current or voltage peak limiters are activated.

When bridging two channels, you must add +6 dB to

the input sensitivity to achieve maximum output voltage

due to the automatic -6 dB gain compensation inserted

by the amplier.

