Instruction Manual

35 
C Series C 20:8X, C 10:8X, C 10:4X and C 5:4X Operation Manual rev. 1.1.4
Appendix
C 5:4X
Level Load Rated power Line Current *2) Watt *1) Thermal Dissipation
120 VAC 230 VAC In Out Dissipated BTU/hr kCal/hr
Standby w. remote Power Off via NomadLink 6 0 6 20 5
Power On, Idling 51 0 51 312 79
Amp Watt
Pink noise
(1/8)
70 V / Ch. 125 x4 1,7 0,9 176 63 114 387 98
16 Ω / Ch. 125 x4 1,5 0,8 156 63 94 319 80
32 Ω / Bridged 250 x2
100 V / Ch. 250 x2 1,4 0,7 152 63 89 305 77
8 Ω / Ch. 125 x4 1,3 0,7 134 63 72 244 62
16 Ω / Bridged 250 x2
4 Ω / Ch. 125 x4 1,3 0,7 131 63 68 233 59
8 Ω / Bridged 250 x2
2 Ω / Ch. 63 x4 0,9 0,5 94 32 62 213 54
4 Ω / Bridged 126 x2
Pink noise
(1/4)
70 V / Ch. 125 x4 3,0 1,6 330 125 205 700 176
16 Ω / Ch. 125 x4 2,4 1,3 265 125 140 476 120
32 Ω / Bridged 250 x2
100 V / Ch. 250 x2 2,3 1,2 252 125 127 433 109
8 Ω / Ch. 125 x4 2,0 1,1 222 125 97 331 83
16 Ω / Bridged 250 x2
4 Ω / Ch. 125 x4 2,1 1,1 228 125 103 350 88
8 Ω / Bridged 250 x2
2 Ω / Ch. 63 x4 1,3 0,7 139 63 76 260 65
4 Ω / Bridged 126 x2
*1) The ampli er’s PSU operates as a non-resistive load, so the calculation “Volts x Amps = Watts” would not be correct. Instead, measured and
speci ed here is what is known as the “Active Power” in the ampli er providing useful, real-world values of power consumption and heat dissipation.
*2) Current draw  gures measured at 230 V. 115 V  gures are 230 V  gures multiplied by two.
