Instruction Manual
C Series C 20:8X, C 10:8X, C 10:4X and C 5:4X Operation Manual rev. 1.1.4
Appendix
34
C 10:4X
Level Load Rated power Line Current *2) Watt *1) Thermal Dissipation
120 VAC 230 VAC In Out Dissipated BTU/hr kCal/hr
Standby w. remote Power Off via NomadLink 6 0 6 20 5
Power On, Idling 51 0 51 312 79
Amp Watt
Pink noise
(1/8)
70 V / Ch. 250 x4 2,7 1,4 274 125 149 509 128
16 Ω / Ch. 250 x4
2,5 1,3 252 125 127 432 109
32 Ω / Bridged 500 x2
100 V / Ch.
250 x4
2,0 1,0 225 125 100 341 86
500 x2
8 Ω / Ch. 500 x2
2,1 1,1 217 125 92 314 79
16 Ω / Bridged
4 Ω / Ch. 250 x4
2,3 1,2 230 125 105 359 90
8 Ω / Bridged 500 x2
2 Ω / Ch. 125 x4
1,3 0,7 136 63 73 249 63
4 Ω / Bridged 250 x2
Pink noise
(1/4)
70 V / Ch. 250 x4 4,9 2,6 526 250 276 942 237
16 Ω / Ch. 250 x4
4,3 2,2 458 250 208 710 179
32 Ω / Bridged 500 x2
100 V / Ch. 500 x2 3,3 1,7 384 250 134 456 115
8 Ω / Ch. 250 x4
3,5 1,8 364 250 114 388 98
16 Ω / Bridged 500 x2
4 Ω / Ch. 250 x4
3,6 1,9 373 250 123 421 106
8 Ω / Bridged 500 x2
2 Ω / Ch. 125 x4
2,2 1,1 219 125 94 321 81
4 Ω / Bridged 250 x2
*1) The ampli er’s PSU operates as a non-resistive load, so the calculation “Volts x Amps = Watts” would not be correct. Instead, measured and
speci ed here is what is known as the “Active Power” in the ampli er providing useful, real-world values of power consumption and heat dissipation.
*2) Current draw gures measured at 230 V. 115 V gures are 230 V gures multiplied by two.