Operation Manual

5. Operation and performance
C SERIES Operation Manual rev 3.0.0
17
5.4. Audio Input and Output connections, setup and features
5.4.1. Balanced / Unbalanced Input connection
Two electronically balanced Phoenix-type inputs are available. Follow the +,– and Ground labels when connecting
the input signal.
If an unbalanced connection is desired this can be achieved by summing the minus (“COLD”) and Ground
terminals and using the + terminal as the “HOT” signal. For the best possible performance, the summing of ground
and minus wires should be done at the source unit end of the cable (e.g. a CD player).
Four connectors are supplied for attaching cables to the inputs. The type of connector used is: Phoenix Contacts,
Part number MSTB 2,5/3-STZ-5,08.