Operation Manual
5. Operation and performance
30
C SERIES Operation Manual rev 3.0.0
5.7.5. DeviceControl software
DeviceControl is LAB GRUPPEN’s proprietary software application for monitoring and controlling networked
FP+ Series and other LAB GRUPPEN NomadLink-ready power amplier. DeviceControl runs on a Windows PC,
which connects via Ethernet to the NLB 60E NomadLink Bridge & Network Controller. DeviceControl provides
comprehensive monitoring of amplier status as well as control of amplier power on/off and individual channel
mute and solo functions.
Please review the DeviceControl Operation Manual for more detailed information.
5.7.6. Third Party Control and Monitoring Capabilities
The NLB 60E NomadLink Bridge & Network Controller can be integrated with third party control systems via
its Ethernet connection. All amplier control functions, fault and warning notications that would otherwise be
displayed via the DeviceControl software can be replicated in a third party control GUI.
Please note that NLB 60E Firmware Ver 2.1.0 (or later) must be used in order to utilize the third party control
and monitoring capabilities of the NomadLink network. Both the rmware package and the control protocol
documentation, which describes the functionality and programming requirements for third party integration,
can be found under the Software & Firmware section of our website at:
http://labgruppen.com/index.php/support/software_rmware/