Operation Manual
5. Operation and performance
C SERIES Operation Manual rev 2.0.0
31
5.7.5. DeviceControl software
DeviceControl is LAB GRUPPEN’s proprietary software application for monitoring and controlling networked
C Series (as well as FP+ Series) power ampliers. DeviceControl runs on a Windows PC, which connects via
Ethernet to the NLB 60E. DeviceControl provides comprehensive monitoring of amplier status as well as control of
amplier power on/off and individual channel mute and solo functions. Please review the DeviceControl Operation
Manual for more detailed information.
NOTE: The current versions of DeviceControl software and the DeviceControl Operation Manual are
available for download on our web site: www.labgruppen.com
5.7.6. Third Party Control and Monitoring Capabilities
The NLB 60E NomadLink Bridge & Network Controller can be integrated with third party control systems via
its Ethernet connection. All amplier control functions, fault and warning notications that would otherwise be
displayed via the DeviceControl software can be replicated in a third party control GUI.
Please note that NLB 60E Firmware Ver 2.1.0 (or later) must be used in order to utilize the third party control
and monitoring capabilities of the NomadLink network. Both the rmware package and the control protocol
documentation, which describes the functionality and programming requirements for third party integration, can be
found under the Software & Firmware section of our website at:
http://labgruppen.com/index.php/support/software_rmware/