DeviceControl Operation Manual
Table Of Contents
- FRONT PAGE
- 1 CONTENTS
- 2 DEVICECONTROL INTRODUCTION
- 3 INSTALLING THE DEVICECONTROL APPLICATION
- 4 CONNECTING YOUR PC TO NOMADLINK
- 5 QUICK GUIDE FOR BASIC FUNCTIONS
- 5.1 Uploading Subnet(s)
- 5.2 Toolbars overview
- 5.3 Start Here
- 5.3.1 Basic operations
- 5.3.2 Lock mode
- 5.3.3 Creating Channel Groups
- 5.3.4 Creating Power Groups
- 5.3.5 Naming (or renaming) Devices, Channels and Groups
- 5.3.6 Saving the configuration file
- 5.3.7 Opening a saved system configuration file
- 5.3.8 Reconnecting to a subnet
- 5.3.9 Establishing Secure Connections
- 5.3.10 Synchronization
- 5.3.11 Normal operation with devices matched and synchronized
- 6 REFERENCE SECTION
DeviceControl Operation Manual 13
Online: When a configuration is created offline
and subsequent connection to a physical subnet is
required, selecting Online interrogates the network
and uploads amplifier information. The type and
position of available devices are compared to the
configuration, and an indication of the “Match” status
can be seen in the Device list view. DeviceControl
must be in the Online state to perform operating
functions (on/off, mute, solo) and to monitor amplifier
status.
Edit bar:
Add Group: Available Offline or Online when access -
ing the Channel or Power View. Clicking this button
adds groups to a subnet configuration.
Add Device: Available Offline or Online when ac-
cessing the Device View. Clicking this button adds
devices to a subnet configuration.
QuicK GuiDe for BAsic functions 5