Brochure

11
StayTemp™ Trays
Constant Temperature. Inside and Out.
StayTemp™ Equipment trays are an exciting new
upgrade that keeps samples and reagents in your
refrigerator, incubator, and laboratory ovens at
temperature despite normal hourly fluctuations in
air temperature. You no longer have to worry about
how many times the doors were opened or whether
or not your samples experience a defrost cycle.
Replace old refrigerator, incubator, and oven
sample racks.
StayTemp Trays protect your samples while inside your
equipment. It’s a simple stainless steel container of
Beads. It keeps your samples and reagents at tempera-
ture inside your incubator, oven, or refrigerator. Even
when the door is left open.
Samples stay at temperature even when refrigerator door is left
open for 5 min. With the refrigerator door open for 5 minutes, a
5 ml liquid sample (water) remained at the set temperature (2 ºC
±0.5 ºC) when stored in a 4 L StayTemp™ equipment Tray. When the
same sample was stored in a standard rack, it warmed up to 6ºC.
The sample temperature was monitored over time. Data represent
temperature measurements recorded by a single temperature probe.
Values represent ±S.E. (n=3).
Lab Armor
StayTemp Trays
Catalog Number
89409-218 89409-222 89409-226
Beads 1 L 2 L 4 L
Exterior Dimensions
(wxdxh)
Inches 6.0 x 6.0 x 4.0 6.0 x 12.0 x 4.0 10.0 x 12.0 x 4.0
cm 15.2 x 15.2 x 10.2 15.2 x 30.5 x 10.2 24.4 x 30.5 x 10.2
Tank Capacity L 1 2 4
PERFORMANCE SPECIFICATIONS