User Guide

73
Service Manual NeoTherm 80 - NeoTherm 285
Youwillnoticethatthesystemdidnotaskyoufora
password,sothisisoneofthevaluesthatcanbe
changedbyanyone.
Entering a Time
Thecontrollerusesseveraldifferenttimingfunctions,
andyoucanchangesomeofthese.(Intheexample
showninFig.D5-5,wewillusethescreenfortheAnti
Short-CycleTime.
• Thecurrentsettingappearsintheupperright-hand
cornerofthescreen.Inthisexample,thisis1min-
ute.
• Thenumbersneartheleftedgeofthescreenshow
theallowablerangeforthisvalue.Inthiscase,the
timecanbesetanywherebetween1minuteand15
minutes.
Inthisexamplewewillchangethetimedelayto5min-
utes.
• PresstheLeft-andRight-Arrowbuttonstomoveto
theboxyouwant.Inthiscase,wewanttochange
themiddlebox-theboxforMinutes.
• UsetheUp-andDown-Arrowbuttonstochangethe
valueinthatbox.
• Youcanchangethenumbersintheotherboxesin
the same way.
• Whenthenewsettingiscorrect,presstheroundOK
button.
Fig. D5-5 - Changing a timing function
Using the Current User Interface - continued
D5
cont.