Instruction Manual

Page 9
Mascot II
Step 3 SET UP MODE, CONTINUED
• Press the NEXT button from the HS screen
5 degrees will appear on the display. This temperature can be adjusted but it is
not recommended.
Example: If the LL set point is 180 degree and the (HS) is 5 degrees, the burner will
shut off at 185 degrees. At 175 degrees, the burner will come back on.
• Press the NEXT button • bL: Stands for Base load. This feature is used for cascading • Press the NEXT button • 50% is the Base Load default before the next boiler fires in a cascading
application
Page 9