Sawyer Side Table Owner’s Manual
If you have any problems with this product, DO NOT RETURN IT TO THE STORE. CALL OUR CUSTOMER SERVICE HOT-LINE AT 855-561-6913 8am-5pm (EST), Monday-Thursday 8am-4pm (EST), Friday. La-Z-Boy® is a registered trademark of La-Z-Boy Incorporated and is used under license to BJI,Inc. © 2017 La-Z-Boy Incorporated.
For warranty and other helpful information, please call us at 855-561-6913, Monday – Thursday 8am- 5pm (EST), Friday 8am – 4pm(EST). Care and Maintenance Be careful to never allow water to build up in frames as this will cause corrosion and freeze damage in cold climates. Wash all frames with a solution of mild soap and water. Rinse with clean water and dry with a soft absorbent cloth towel. Frames can be treated with a liquid wax for maximum protection against UV rays and/or salty damp air.
PARTS LIST PICTURE Q’TY PART# DESCRIPTION A Table Rim 1 B Table Leg 4 C Leg Stretcher 1 D Glass Top 1 E Hex Head Bolt M6x15 mm 12 F Washer M6 12 G Plastic Cap M6 12 H Hex Wrench 1
Assembly Steps: Step 1. Carefully place the table rim (A) upside down on a non-abrasive surface. Then assemble the table legs (B) to the table rim (A) with bolts (E) and washers (F) by using hex wrench (H). See Figure 1. Part# A x 1 Part# B x 4 Part# E x 8 Figure 1 Note: DO NOT tighten the bolts completely at this stage.
Step 2. Assemble the leg stretcher (C) to the table legs (B) with bolts (E) and washers (F) by using hex wrench (H). See Figure 2. Part# C x 1 Part# E x 4 Part# F x 4 Part# G x 4 Figure 2 Note: Tighten completely until all the bolts are in place.Then cover the bolts with plastic caps (G) .
Step 3. Turn your table right side down,then place the glass top (D) on the table rim (A).
Warning: a. Do not crawl, stand, or sit on glass table tops. b. Do not set or lay heavy items on glass table tops. c. Avoid extreme hot & cold items being placed on glass table tops. d. This glass table top is produced with tempered glass which is designed to safely shatter in small pieces when impacted or stressed beyond strength limitations.
