Bristol Woven Coffee Table Owner’s Manual If you have any problems with this product, DO NOT RETURN IT TO THE STORE. CALL OUR CUSTOMER SERVICE HOT-LINE AT 855-561-6913 8AM-5PM (EST), Monday – Thursday 8AM-4PM (EST), Friday ® La-Z-Boy is a registered trademark of La-Z-Boy Incorporated and is used under license to BJI, Inc. © 2017 La-Z-Boy Incorporated.
This product is not intended for commercial use and is for residential use only. All warranties are limited and apply to the original purchase only. Proof of purchase is required. Please visit us at www.LaZboyOutdoor.com. There you can review our full warranty details and other helpful information. Or, you may call us at 855-561-6913, 8am-5pm (EST), Monday-Thursday, 8am-4pm (EST), Friday.
Assembly Steps: Note: Do not fully tighten bolts until product is completely assembled. Step 1. Carefully place the table rim (A) upside down on a non-abrasive surface. See Figure 1. Step 2. Assemble the table legs (D) to the table rim (A) with bolts (E) and washers (F) by using allen wrench (H). as shown in figure 1. A Figure 1 Step 3. Assembly the leg connector (B) to the table legs (D) with bolts (E) and washers (F) by using allen wrench (H). See Figure 2. Step 4.
Step 6. Verify all bolts are securely tightened before use and turn your table right side up. Step 7. Place the table glass (C) on the table rim (A), See Figure 3. I Figure 3 Now your table is ready to use. WARNING: 1. Do not crawl, stand, or sit on table tops. 2. Do not set or lay heavy items on table tops. 3. Avoid extreme hot & cold items being placed on table tops.
Bristol Woven Lounge Chair Owner’s Manual If you have any problems with this product, DO NOT RETURN IT TO THE STORE. CALL OUR CUSTOMER SERVICE HOT-LINE AT 855-561-6913 8AM - 5PM (EST), Monday -Thursday 8AM – 4PM (EST), Friday La-Z-Boy® is a registered trademark of La-Z-Boy Incorporated and is used under license to BJI, Inc. © 2017 La-Z-Boy Incorporated.
This product is not intended for commercial use and is for residential use only. All warranties are limited and apply to the original purchase only. Proof of purchase is required. Please visit us at www.LaZboyOutdoor.com. There you can review our full warranty details and other helpful information. Or, you may call us at 855-561-6913, 8am-5pm (EST), Monday-Thursday, 8am-4pm (EST), Friday.
I Back cushion 1 J Lumbar pillow 1 Assembly Steps: Note: Do not fully tighten bolts until product is completely assembled. Step 1. Attach right arm (A1) and left arm (A2) into chair back (B) with M6 bolts (D) and M6 washers (E) by using allen wrench (G). See Figure 1. C Figure 1 Step 2. Attach seat (C) to chair back (B) with M6 bolts (D), M6 washers (E) by using allen wrench (G). See Figure 2. Figure 2 Step 3.
Figure 3 Step 4.Tighten all bolts with allen wrench (G) completely, and cover them with bolt caps (F), See figure 1~3. Step 5.Turn over the chair, and place seat cushion (H), back cushion (I) and lumbar pillow (J) in chair as shown. See Figure 4. Step 6. Repeat step 1,2,3, 4 and 5 for the other chair. Figure 4 Now your lounge chair is ready for your enjoyment.
Bristol Woven Loveseat Owner’s Manual If you have any problems with this product, DO NOT RETURN IT TO THE STORE. CALL OUR CUSTOMER SERVICE HOT-LINE AT 855-561-6913 8AM-5PM (EST), Monday – Thursday 8AM-4PM (EST), Friday ® La-Z-Boy is a registered trademark of La-Z-Boy Incorporated and is used under license to BJI, Inc. © 2017 La-Z-Boy Incorporated.
This product is not intended for commercial use and is for residential use only. All warranties are limited and apply to the original purchase only. Proof of purchase is required. Please visit us at www.LaZboyOutdoor.com. There you can review our full warranty details and other helpful information. Or, you may call us at 855-561-6913, 8am-5pm (EST), Monday-Thursday, 8am-4pm (EST), Friday.
I Back cushion 2 J Toss pillow 2 Assembly Steps: Note: Do not fully tighten bolts until product is completely assembled. Step 1. Attach right arm (A1) and left arm (A2) into chair back (B) with bolts (D) and M6 washers (E) by using allen wrench. See Figure 1. C Figure 1 Step 2. Attach seat (C) to chair back (B) with M6 bolts (D) and M6 washers (E) by using allen wrench. See Figure 2. Figure 2 Step 3.
Figure 3 Step 4. Tighten all bolts with allen wrench (G) completely, and cover them with bolt caps (F), See figure 1- 3. Step 5. Turn over the chair, and place seat cushion (H), back cushion (I) and toss pillow (J) in chair as shown. See Figure 4. Figure 4 Now your loveseat is ready for your enjoyment.
