Instructions/Assembly Guide

Step 3

Step 4

Attach Seat Plate (D) to the bottom of the Seat Cushion (F) (with the front

of the seat plate facing the front of seat cushion). Attach by using 1-3/4”

Screws (J) for the front holes of the Seat Plate (D) and 1” Screws (I) for the

rear holes of the Seat Plate (D) and tighten screws.

*Note: Tighten the screws completely.

Insert Levers (D1 & D2) of Seat Plate (D) to the pre-attached cable lever

receivers on the underside of Seat Cushion (F) (with the front of the

levers facing the front of seat cushion). Push down the key on the

receivers to pull out the levers.

*Note: Fix the cable for the seat plate into the plastic clips attached to

the bottom of the seat cushion.

Insert

Assemble the lever

Push

Disassemble the lever