Full Product Manual
Welcome!
Thank you for purchasing the Atomic Digital Wall Clock, designed for
years of trouble-free performance. Please read this important note
about setup. Thank you!
IMPORTANT:
After installing batteries, the clock will look for the Atomic time signal
for 7 minutes. The buttons will not function during the signal search.
Options:
• Press the WWVB SEARCH button once to stop the Atomic time
signal search.
• Manually set the time, date, and time zone.
• The clock will search for the Atomic time signal again after
midnight.
• Press WWVB SEARCH button anytime, to start an Atomic signal
search.
For information about Atomic Time, visit:
www.nist.gov/pml/div688/grp40/wwvb.cfm
Get Started
1. Insert 2 new AA, Alkaline batteries into the clock. Observe the
correct polarity.
2. Wait for the clock to set itself to Pacic time zone (default) then
press the ZONE button to select your time zone.
OR
3. Stop the initial Atomic Time Search and set the time manually.
Page 1 www.lacrossetechnology.com/support WT-8005U
AA
AA