Installation Guide
Page 6Page 5 Page 7
Page 8
WARRANTY INFO
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product
relating to manufacturing defects in materials & workmanship.
For Full Warranty Details, Visit: www.lacrossetechnology.com/support
CARE + MAINTENANCE
•
Do not mix old and new batteries.
•
Do not mix Alkaline, Lithium, standard, or rechargeable batteries.
•
Always purchase the correct size and grade of battery most suitable for intended use.
•
Clean the battery contacts and also those of the device prior to battery installation.
•
Ensure the batteries have with correct polarity (+ / -).
•
Remove batteries from equipment that will not to be used for an extended period.
•
Promptly remove expired batteries.
CANADA STATEMENT
This device complies with CNR Industry Canada license -exempt devices. Operation is subject to the following two
conditions:
(1 ) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
•
Increase separation between equipment & receiver.
•
Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with any other antenna or transmitter.
Operation is subject to the following two conditions:
(1 ) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
CAUTION!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized changes or modifications to
this equipment. Such changes or modifications could void the user authority to operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed using
electronic, mechanical or chemical process without the written permission
of the publisher.
This booklet may contain errors or misprints. The information it contains is regularly checked and corrections are included
in subsequent editions. We disclaim any responsibility for any technical error or printing error, or their consequences. All
trademarks and patents are recognized.
WARNING: This product can expose you to chemicals including styrene, which is known to the State of
California to cause cancer. For more information go to: www.P65Warnings.ca.gov
WE’RE HERE TO HELP!
If you require additional support, call or customer support team based out
of La Crosse, Wisconsin.
Phone: 1.608-782-1610
Or fill out our online support request form here: bit.ly/contact_techsupport
Our knowledgeable support team is available: Monday-Friday, 8am-6pm
CST
JOIN THE CONVERSATION
Ask questions, watch detailed setup videos, and provide feedback
on our social media outlets!
1. Hold the AL/HOUR button to enter the Alarm Settings Menu.
2. Press the AL/HOUR button to adjust the hour, and MODE/MIN
button to adjust the minutes.
3. Press the SNOOZE button to confirm adjustments and exit.
SET ALARM
• Press the AL/HOUR button to activate or deactivate the alarm.
• The Alarm Icon will appear when activated.
ACTIVATE | DEACTIVATE ALARM
SNOOZE
• Press the SNOOZE button to silence an active alarm for 5
minutes (the Alarm Icon will flash).
• Press any button except the SNOOZE button to stop the alarm
for 24 hours.
Indoor Temperature Range: 14.1°F to +99.9°F (-9.9ºC to +37.7ºC)
Outdoor Temperature Range: -39.8°F to +139.8°F
(-39.9ºC to +59.9ºC)
Distance: Over 330 ft. (100 meters) RF 915MHz (open air)
Interval: About every 4 seconds
Power Alarm Clock: AC6: GPU280450150WD00 (included)
3-AA, IEC, LR6 batteries (not included)
TX37U-IT Sensor: 2-AA, IEC, LR6 batteries (not included)
Battery Life Alarm Clock: Over 24 months with AC power cord
Battery Life TX37U-IT Sensor: Over 24 months with reputable
batteries.
Dimensions Alarm Clock: 5.6“L x 1.4“W x 3.8“H
(14.2L x 3.56W x 9.65H cm)
Dimensions TX37U-IT Sensor: 1.50”L x 0.83”W x 5.05”H
(3.82L x 2.12W x 12.83H cm)
SPECIFICATIONS
LOW BATTERY INDICATORS
• When TX Battery Indicator appears, replace batteries in your
sensor.
• When RX Battery Indicator appears, replace batteries in your
clock.
SENSOR WEATHER SHIELD-NOT INCLUDED
The Sensor Weather Shield is designed to protect your
outdoor sensor from rain and snow. This shield will oer
limited protection from the sun’s heat.
Purchase at: http://bit.ly/925-1418
• Mount the Outdoor Sensor on a north-facing wall in a well
shaded area. Under an eave or deck rail is preferred.
• The maximum wireless transmission range to the alarm clock
is over 330 feet (100 meters) in open air, not including walls or
floors.
• Be sure the outdoor sensor is mounted vertically.
• Watch sensor mounting video: http://bit.ly/TH_SensorMounting
POSITION SENSOR