FAQ

La Crosse Technology, Ltd. Page 9
Projection
Change projection orientation
• Arrow button: The button has an icon that is a set of four arrows pointing up, down,
left, and right.
• Each press of this button will change the direction of the numbers projecting onto the
ceiling by a quarter turn.
Project temperature only
• This clock is designed to continually alternate between time and outdoor temperature.
This cannot be adjusted.
Projected temperature is dashes
• Temperature projection: This unit will only project the temperature when the sensor is
connected to the clock. If the temperature does not show on the clock, complete a
restart.
Projection is dim
• The projection feature works best in dark room.
• Press the button that looks like a SUN twice. This clock has a projection intensity
feature that will choose intensity levels or turn the projection off.
• Check for proper power cord. The clock requires a power cord to operate properly.
• If on batteries only operation, the batteries may be weak.
Projection does not show
• Check for proper power cord. The clock requires a power cord to operate properly.
• Press the button that looks like a SUN twice. This clock has a projection intensity
feature that will choose 3 intensity levels or turn the projection off.
• Check that power cord is plugged in correctly.
• Press snooze button to see if projection shows. If it shows when you press the
snooze button but not at other times, double check the power cord connection and
remove the batteries. If the display goes blank, the power cord is not plugged in
correctly.
Clock Has Missing Segments
• This is generally a power related issue.
• Batteries may be overpowered or underpowered. Remove batteries from clock.
• Press any button 20 times. Leave the clock unpowered for 1-2 hours.
• Insert fresh alkaline batteries with correct polarity.