FAQ

La Crosse Technology, Ltd. Page 8
Manually Set Time/Calendar/Alarm: Program Menu
TIP: Press only one button at a time while setting the clock.
There are five function buttons: AL/HOUR, Sun Icon (sun) Directional Icon (four arrows)
MODE/MIN with SNOOZE above the time display.
1. TIME ZONE: Press and hold the MODE/MIN button until the display flashes. The Time
Zone will flash, showing a number following by the letter h. North American Time
Zones are negative numbers.
• -4h Atlantic
• -5h Eastern
• -6h Central
• -7h Mountain
• -8h Pacific
• -9h Alaskan
• -10h Hawaiian
Use the MODE/MIN to change the Time Zone. Press and release the SNOOZE button
once.
2. TIME: The Time will flash. Use the MODE/MIN button to set the Minute and the
AL/HOUR button to set the Hour. If using 12-hour Time Mode, be sure to set the hour
for am or pm. Press and release the SNOOZE button once.
3. YEAR: The Year will flash. Use the MODE/MIN button to set the year. Press and
release the SNOOZE button once.
4. DATE: The Date will flash. Use the MODE/MIN to set the Date and the AL/Hour button
to set the Month. Press and release the SNOOZE button once.
5. 12/24-HOUR TIME MODE: 12h or 24h will flash on the display. Use MODE/MIN button
to change from 12-hour to 24-hour time. Press and release the SNOOZE button once.
Note: When in 24-hour time the date will be displayed as Day first then Month.
6. F/C: FAHRENHEIT will flash. Press and release MODE/MIN button to select between
Fahrenheit and Celsius. Press and release the SNOOZE button once.
7. DAYLIGHT SAVING TIME: DST will show with either ON or OFF flashing. Most states
use DST, so this should be set to ON. However, if your location does not use DST, use
the MODE/MIN button to turn it OFF. Press and release the SNOOZE button once.
Display Modes
There are four possible display modes to view the day, seconds, and temperature (remote
temperature is constantly displayed).
Default is indoor temperature
To change the display:
• Press and release the MODE/MIN button. The display will show seconds
• Press and release the MODE/MIN button again. The display will show alarm time.
• Press and release the MODE/+button again. The display will show month, date.