Full Product Manual

Page | 2 Page | 3

POWER UP

1. Remove the back cover by twisting counter-clockwise.

2. Insert 1 fresh AA battery into your clock according to the

polarity marking. The battery is a snug ﬁt.

3.. Rotate the Time Set Wheel to set your time.

POSITION

Indoor: Mount your clock on a wall using the hanging hole

on the back of your clock.

Outdoor: Choose a shaded location with an overhang to

protect the clock from the sun, standing snow and rain.

Sunlight may cause high temperature readings.

THERMOMETER / HYGROMETER

• Your thermometer and hygrometer have been

pre-calibrated and should not need adjustment.

• To check the accuracy of these sensors, tune into your

local weather forecast. The sensors can manually be

adjusted.

• Before manually adjusting your sensors, allow the clock to

sit at room temperature for 2 hours.

• To manually adjust your sensors, gently turn the

temperature or humidity sensor adjustment on the back of

the clock until desired setting is reached.

promotions, product support, and awesome giveaways.

LET’S BE SOCIAL!

Time Set Wheel