Instruction manual

51
1. The distance of the weather station or transmitter should be at least 1.5 to 2 meters away from any
interfering sources such as computer monitors or TV sets.
2. Avoid positioning the Weather Station onto or in the immediate proximity of metal window frames.
3. Using other electrical products such as headphones or speakers operating on the same signal frequency
(868MHz) may prevent correct signal transmission and reception.
4. Neighbours using electrical devices operating on the 868MHz signal frequency can also cause interference.
Note:
When the 868MHz signal is received correctly, do not re-open the battery cover of either the transmitter or Weather
Station, as the batteries may spring free from the contacts and force a false reset. Should this happen accidentally
then reset all units (see Setting up above) otherwise transmission problems may occur.
The transmission range is about 100 m from the transmitter to the Weather Station (in open space). However, this
depends on the surrounding environment and interference levels. If no reception is possible despite the
observation of these factors, all system units have to be reset (see Setting up).
POSITIONING THE WEATHER STATION:
The Weather Station comes attached with removable table stand, which provides the option of
table standing or wall mounting the unit. Before wall mounting, please check that the outdoor
temperature and humidity values can be received from the desired locations. To wall mount:
1. Fix a screw (not supplied) into the desired wall, leaving the head extended out the by about
5mm.
2. Remove the stand from the Weather Station by pulling it way from the base and hang it onto
the screw. Remember to ensure that it locks into place before releasing.