Instruction manual

LCD CONTRAST SETTING

The LCD contrast can be set to 8 different levels to suit the users needs (default LCD contrast setting is LCD 5). To

set the desired contrast level:

1. Press the IN key to select the level of contrast desired.

2. Press the SET key to confirm and enter the “Time Zone setting” or exit the setting mode by pressing the

CH key

TIME ZONE SETTING:

The time zone default of the Weather Station is 0. To change to another time zone:

1. Press the SET key after completing the LCD contrast setting in order to enter the time zone setting

(flashing).

2. Using the IN key, set the time zone. The range runs from 0 to +12 and then runs from -12 back to 0 in

consecutive 1hour intervals.

3. Press the SET key to confirm and enter the “Time Reception ON/OFF setting” or exit the setting mode by

pressing the CH key

TIME RECEPTION ON/OFF SETTING

LCD (flashing)

Time Zone (flashing)

Digit flashing