Installation Manual

WS-9160U-IT www.lacrossetechnology.com/support Page | 3

Low

Battery

Icons

View/Reset MIN/MAX Readings

1. Press the MIN/MAX button once to view the minimum indoor

and outdoor temperature.

2. Press the MIN/MAX button once more to view the maximum

indoor and outdoor temperature.

3. Hold the MIN/MAX button for 3 seconds to reset all MIN/MAX

temperatures.

Note: When using multiple sensors, press the CH button then the

MIN/MAX button to view the MIN/MAX reading on a different

channel

Outdoor Temperature Reception Icon/Channel Indicator

• The outdoor temperature reception icon will flash every

second when searching for the sensor.

• Once connected, reception icon will show for 3 seconds

once the outdoor temperature update is received.

• The channel indicator will show below the outdoor

temperature.

• Press the CH button to view sensors on other channels.

Note: Channel 1 will not show if only one sensor is

connected.

Setup with Multiple Sensors

1. Insert batteries into sensor 1

2. Insert batteries into wireless thermometer

3. When outdoor temperature appears, insert batteries into

sensor 2

4. When channel 2 appears insert batteries into sensor 3

5. Keep station and all sensors together for 15 minutes.

Low Battery Icon

• When the TX icon is displayed replace

batteries in the outdoor sensor.

• When the RX icon is displayed replace

batteries in the wireless thermometer .

Outdoor

Reception

Icon

Outdoor

Channel

Icon