Installation Guide

This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Increase separation between equipment & receiver.
• Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with any other
antenna or transmitter.
Operation is subject to the following two conditions:
(1 ) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference caused
by unauthorized changes or modifications to this equipment. Such changes or
modifications could void the user authority to operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or
duplicated or processed using electronic, mechanical or chemical process without
the written permission of the publisher.
This booklet may contain errors or misprints. The information it contains is regularly
checked and corrections are included in subsequent editions. We disclaim any
responsibility for any technical error or printing error, or their consequences. All
trademarks and patents are recognized.
FCC STATEMENT
WARRANTY INFO
La Crosse Technology, Ltd. provides a 1-year limited time warranty
(from date of purchase) on this product relating to manufacturing
defects in materials & workmanship.
For Full Warranty Details, Visit:
www.lacrossetechnology.com/support
CARE + MAINTENANCE
· Do not mix old and new batteries.
· Do not mix Alkaline, Lithium, standard, or rechargeable batteries.
· Always purchase the correct size and grade of battery most
suitable for intended use.
· Clean the battery contacts and also those of the device prior to
battery installation.
· Ensure the batteries have with correct polarity (+ / -).
· Remove batteries from equipment that will not to be used for an
extended period.
· Promptly remove expired batteries.
CANADA STATEMENT
This device complies with CNR Industry Canada license -exempt
devices. Operation is subject to the following two conditions:
(1 ) This device may not cause interference; and
(2) This device must accept any interference, including interference
that may cause undesired operation of the device.
Our knowledgeable customer support team is available: Monday-Friday,
8am-6pm CST.
Phone: [phone]
WE’RE HERE TO HELP!
SPECIFICATIONS
Indoor:
Temperature Range: 14.2°F to 100°F (-9.9ºC to 37.8ºC)
Outdoor:
Temperature Range: -39.8°F to 139.8°F (-39.9ºC to 59.9ºC)
Distance: Over 330 ft. (100 meters) RF 915MHz (open air)
Interval: About every 4 seconds
Power:
Atomic Clock 2 - AA, IEC, LR6 batteries (not included)
TX37U-IT Sensor: 2 - AA, IEC, LR6 batteries (not included)
Battery Life:
Atomic Clock Over 24 months
TX37U-IT Sensor: Over 12 months
Dimensions:
Atomic Clock: 10.25” x 1.16” x 9.74”
(26.06 x 2.95 x 24.75cm)
TX37U-IT Sensor: 5.05” x 1.50” x 0.83”
(12.83 x 3.82 x 2.12 cm)
Page | 6 Page | 7 Page | 8Page | 5
Ask questions, watch detailed setup videos, and provide feedback on
our social media outlets!
JOIN THE CONVERSATION
LOW BATTERY INDICATORS
• When TX Battery Indicator appears, replace batteries in your sensor.
• When RX Battery Indicator appears, replace batteries in your clock.
WARNING: This product can expose you to chemicals including
styrene, which is known in the State of California to cause cancer.
For more information go to: www.P65Warnings.ca.gov
• Press and release the PLUS button to show seconds counting
in place of Indoor Temperature, Outdoor Temperature, or Weekday.
• Press and release the PLUS button again to remove seconds from the
display.
CUSTOM DISPLAY
MOON PHASE
• With the moon shown against a light colored background, the phases
will show opposite to a paper calendar. The segments that are
highlighted will portray the part of the moon that is lit.
Full Moon
New Moon
Small Waning
Crescent
Large Waxing
Gibbous
Large Waning
Crescent
Small Waxing
Gibbous
Last Quarter
First Quarter
Small Waning
Gibbous
Large Waxing
Crescent
Large Waning
Gibbous
Small Waxing
Crescent